316: 2\" Post Reducer \"Tapered\"

Use with a Perpendicular Joiner for round tube or a Deck Tee if joining to Timber
<

316: 2\" Round Base Plate/Flange

Used with 2 Tube.
Can be used at the base or top of a post or at the ends of a handrail.
Can be welded or pop-riveted to the tube.

316: 2\" Oblong Base Plate/Flange

Used with 2 Inch tube.
Can be Welded, Pop Riveted or Gluded to the tube.

2" Blank Post

Length: Up to 1 metre
Diameter: 2" (50.8mm)
Thickness: 1.6mm
Grade: 316
Finish: Mirror
Use: To build your own posts

2\" Adjustable Rail Support Radiused \"Internal Fit\"

2\" Adj. Rail Support Radiused \"External Fit\"

2\" Adj. Rail Support Flat Base \"Internal Fit\"

2\" Adj. Rail Support Flat Base \"External Fit\"

316: 1\" Tube 2\" Radius Perpendicular Joiner \"Flush Fitting

Used to connect 1\" tube to 2\" tube. Can also be used with Post reducer.

316: 2\" Tube 2\" Radius Perpendicular Joiner \"Flush Fittin

60 Gram 2 part Epoxy Glue Set

Centre: 2\" Pre-Drilled Post - Up to 15 Holes

Use: Centre Post
Length: Up to 1 meter (usually 960mm to allow for top rail)
Diameter: 2\" (50.8mm)
Thickness: 1.6mm
Grade: 316
Finish: Mirror
Holes: Up to 15 holes drilled to your specifications
Top/Base: Add you own

1 Inch Tee 90 Degrees

1\" Adj. Rail Support Flat Base \"Internal Fit\"

1.5" Adjustable Rail Support Flat Base "Internal Fit"

316 Grade Stainless Steel
Fits inside 1.5" tube with a 1.6mm wall
Can be used as a adjustable top for a stair or ramp post or at the end of a handrail that needs to be installed on an angle